ZFS-2
Filtering And Lubrication Unit ZFS-2
Available versions:
The filtering and lubrication unit ZFS-2 is designed to purify compressed air from solid and contaminations and liquids (water drainage), where size of solid contaminations is controlled by appropriate filtering mesh. The unit enables adjustment of compressed air pressure at the device output and keeps it constant regardless of oscillations and surges of compressed air supplied to the device inlet above the reduced output pressure. An embedded oil injector is designed to saturate compressed air with oil when pneumatic equipment supplied from the device output needs lubrication.
Technical parameters |
Unit |
ZFS-2 |
|---|---|---|
Dimensions: L x W x H |
mm |
90x200x270 |
Maximum pressure of |
MPa |
1,2 |
Filtering accuracy |
μm |
20 |
Condensate drainage |
Semiautomatic / manual |
|
Working temperature |
⁰C |
od -10 do +60 |
Flow rate |
m3/min. |
3,5 |
Weight |
kg |
2,65 |
Outlet port |
Rd 32 x 1/8” |
|
Inlet port |
Rd 32 x 1/8” |
|
Due to continuous technical development, technical parameters or our products may change without notice.
The device meets applicable essential requirements imposed by the EU Directives 2006/42/EC and 2014/34/EU (ATEX) as well as harmonized standards.
Safety code of the device: I M2 Ex h I Mb
The device can be operated at underground mining plants in workings classified to ‘a’, ‘b’ and ‘c’ degree
of the methane explosion hazard and/or to class ‘A’ and ‘B’ of the coal dust explosion hazard.
